meta data for this page
- en
Troubleshooting
Common Problems
The most common problems with FastManager can usually be resolved by following the steps outlined here:
Troubleshooting Common Problems
Error Message: "Cannot find input table or query"
“Cannot find input table or query” happens when FastManager has lost its connection to the database. And that happens when the computer has momentarily lost its connection to the network,
Double-check that your computer can reach the shared folder or network location where the FastManager database is stored, then close and reopen FastManager. Or restart your computer
If the problems continues, you may need to have your network administrator or I.T Support person examine why the computer is intermittently dropping its link to the network
Error Message: "Disk or network error"
Disk or network error
indicates that the computer has lost its connection to the network, and as a result FastManager has lost its connection to the database.
- Double-check that your computer can reach the shared folder or network location where the FastManager database is stored, then close and reopen FastManager.
- Or restart your computer
If the problems continues, you may need to have your network administrator or I.T Support person examine why the computer is intermittently dropping its link to the network
FastManager cannot find your database files
When launching FastManager, you see the error message:
FastManager cannot access your database files …
- This is most likely a networking problem:
- Verify (through Windows File Explorer) that you can reach the shared folder where your FastManager database is stored,
- Also verify that your FastManager Company Database Files are, in fact, visible in that folder
- Then restart FastManager, or:
- Restart your computer
Sales Screen - The tax is calculating incorrectly
Most likely there is a 2nd tax is being charged on the Invoice, but you can't see it on the Sales Screen because 'Tax 2' is disabled in the Preferences:
- In FastManager, go to:
File → Preferences → (continue) → Options
- UNcheck the box:
Disable Tax 2
After that, close and reopen the Sales Screen (if it was open)
- Next, open that Invoice on the Sales Screen and check in the totals block at the lower-right to see if there is a value next to 'Tax 2'
- If there is, you can change it by first selecting 'Edit this Invoice' from the Convert button, then clicking on the word 'Tax 2' and selecting a different tax
Remember to also go to 'Edit → Customers' to check that customer's setup on the Financial tab (set Tax 2 to “Non”)
Logo disappearing
There are only 2 possibilities:
- The specific path to the location where the logo was originally saved is no longer accessible to the computer in question
- The logo was reloaded in FastManager and saved at a location which is not accessible to the computer in question.
Solution:
- The logo should be re-loaded in FastManager, but this time it must be saved in the correct location (one that is universally accessible to all computers), by going to “Network” during the
Save
step.
Clear FastManager's Cache
With the steps below we will reset FastManager's local configuration and cache.
This is often the solution to various minor glitches and other obscure issues that can crop up in certain systems or environments.
This will also reset all your internal preferences, such as column-widths and saved filters.
This will not affect your company database (Customers, Orders, etc..), but it will make FastManager “forget” where the database is, which is really no issue - you will simply reconnect FastManager to the company database afterward.
First of all, check the lower-left corner of the FastManager program window for the “path” to your Company Database
Make a note of that path, you will need it later.
Close FastManager
Next, press the Windows Key + R (simultaneously) on your keyboard to bring up the Run command
Type (or copy/paste) the following and press Enter:
%USERPROFILE%\AppData\Local\JCWSoftwareLLC\
- This will open Windows File Explorer to FastManager's local configuration folder
- Delete everything in that folder
Finally, (re)connect FastManager to the database
Clean Reinstall
Go to Programs and Features
in Windows Control Panel
First - ;ocate FastManager Updates
and uninstall it (if it is listed)
Next, locate FastManager
and uninstall it
Now go to the FastManager website and download the FastManager “setup” program (select: 'Existing Customer' from the Download
menu):
Once the setup program has downloaded, locate it in your 'Downloads' folder (or wherever your browser puts the downloads) and double-click on it to start the FastManager installation process:
Update FastManager
The process for updating FastManager is simply a matter of downloading the update from our updates page, and then installing it on the computer:
- Go to www.fastmanager.com and check on the home page under the
Latest Update
announcement (to the right of the page
- Then click on the link to be taken to the downloads page
- From there you can download the latest update
- Locate the file
fastmanagerupdate_201xxx.exe
in your downloads folder
- double-click the file to start the install process
- accept all the defaults
- reboot if prompted
Test/repair the databases
Create a Support Request
If you have not already done so, open a new support ticket, requesting that we test/repair and optimize your databases.
- You can Click Here to go there and open the ticket now.
Once the support request has been created, we will respond (by email) with a unique upload link that you can send the ZIP file through.
- Please do not attach the database files directly to the ticket (or to an email), they will be rejected by our ticket system for space and security reasons.
Locate and prepare the company database files
Any changes that are made in the meantime will be LOST when the repaired databases are returned.
Step 1: locate your “FastManager Data Folder”
This is the folder where your company database is stored, as well as various other files and folders that FastManager uses.
- Open FastManager and check in the lower-left corner of the program window, there you will see the “path” to where your main company database is stored.
Using Windows File Explorer locate that folder. In it you will find the following files:
db.qdb
catalogs.mdb
(or it might be justcatalogs
)
And some folders, such as:
thumbnails_1
upsshippinglabels
- … and a few others.
Here is an example:
db.qdb
.This is the file which contains all your customers, orders, and everything else (except your catalogs and items, those are stored seperately)
Step 2: Compress (zip) the database files
- Get everyone to close FastManager
These 2 lock files should disappear after everyone closes FastManager.
If they are still there even after you are sure that FastManager is closed everywhere - contact the HelpDesk for assistance.
- Use
Ctrl
+left-click
to selectively highlight the 2 database files.
- Select the fies:
db.qdb
andcatalogs.mdb
(might be listed as just:catalogs
)
- Now right-click on one of the highlighted items and select:
Send to --> Compressed (Zipped) Folder
This will zip the selected files together into one ZIP archive
Now you should have a new file in that folder called: db.zip
or, possibly: catalogs.zip
.
- This ZIP archive is what you will be sending to the HelpDesk.
If you have any trouble with, or questions about, any of the above steps - please feel free to make use of the 'Live Support' facility on our website:
- (available Monday to Friday, from 9am to 5pm EST)
More Thoughts
- Make sure that the FastManager Data Folder is *excluded* from real-time scanning in the antivirus software on ALL computers
- Make sure that the FastManager Data Folder is NOT included in any kind of automated backup or sync tools
- see also: How to backup the database
- If you continue to experience laginess and slowness in the program, you may want to consider moving the Data Folder to a new host.
- Or upgrading the database backend to SQL Server (contact us for more info)